DIN 2714

now browsing by category

 

Best quality tool steel, die steel, and mold steel suppliers for engineering work in India!

As one of India’s leading special steel suppliers, #ViratSpecialSteels can supply the following industries requirement of steel practically off-the-shelf.

Virat Special Steels Pvt. Ltd., is one of India’s top Tool Steel, Die Steel suppliers, and Mold Steel Stuckists. This company provides special steel of every kind in sizes and shapes (flat, round, or bars) per customer requirements. Based in #Gurgaon (Haryana) & #Ludhiana (Punjab) India.

Forging Industry – Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. Mainly material used: Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343(H11).

Pressure Die Casting – Die casting is performed by forcing molten metal under high pressure into a mold cavity & the cavity (mold cavity) is manufacture by using two hardened tool steel dies & perform similar to an injection mold. Mainly material used: Hot die steel i.e. DIN 1.2344(H13), DIN 1.2343(H11), and DIN 1.2581(H21).

Aluminum Extrusions – In Extrusion process material is pushed through a die to the desired cross section & in this manufacturing process it creates very complex cross section. The parts are being formed with an excellent surface finish. Mainly material used: – Hot die steels i.e. DIN 1.2344 (H13) grade.

Automotive Industry – Automotive industry are wide range of companies is mainly involved in manufacturing, design, development, of motor vehicles. Mainly material used: – Din 1.2714(DB6), DIN 40NiCrMo84(EN24), DIN 3343(M2), 16Mncr5, 20Mncr5.

Plastic industry – Polymer materials are manufactures in plastic industry and offers services to aerospace, building, construction, electronics, packaging and transportation. Mainly material used: – DIN 2738 (P20+ Ni), DIN 2311(P20).

Railways – They are involves mainly in manufacturing railways components i.e. Railway gear holder, Railway bogie cast parts, Railways axles, railways Sets of pins, Ground lever frame, adjustable crank, Compressor pistons, Compressor bearings. Mainly material used:-Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343 (H11), DIN 40NiCrMo84(EN24), 20NiCrMo5(EN353).

Oil & Gas – Oil & Gas they supply more than 60 percent of our nation’s energy. Natural gas also helps generate the electricity that powers our daily lives.

They also have a fully equipped quality assurance and process examination facility that conducts tests such as hardness and analyses of grain structure.

Find us:
Website: https://www.viratsteels.com/


Email us: info@viratsteels.com
Call Us Now: +91-9814021775

2714 Steel Supplier, Stockiest, Dealer, Trader Importer and Exporter in India!

Steel has transformed the social economic landscape and our affinities with this alloy of iron have become more pronounced with the passage of time. These affinities could be attributed to the salient attributes that steel adores and which make it a preferred choice in multitudes of applications. We can’t even imagine some core activities without steel. No wonder, we have been passionate to gear metallurgical sciences to develop more resonant grades and standards in steel and SS. DIN 2714 is a hot work steel that allows making best forging dies. Metals based manufacturing today forms the basis of many secondary and ancillary enterprises and they rely on steel dies. 2714 steel or DB6 is the considered the best choice for making the toughened dies in different sizes and dimensions.

Why Din 1.2714 / AISI L6 apt for making forging dies and molds?

DB6 steel as a choice for making forging molds and dies is due to various characteristics that it has relative to other metals. It is a hot work steel and therefore allows making the molds that are resilient enough against the hot metals that are put in them. The high level annealing and tempering of DIN 2714 steel causes extreme toughening and hence generates desirable hot working capacity for the forging tasks. The presence of chromium, nickel, molybdenum and vanadium in 2714 Steel alloy generate the extra toughness and very high wear resistance thus making it perfect contender for closed die forgings of entire diversity. The manufacturers of DB6 / Din 2714/ SKT4/ AISI L6 hardened steel dies ensure that the desirable hardness is delivered to the die. Generally, it is in the range of 370 to 410 HB for round type and 355 to 400 HB for flat/square type.

Custom making of DIN 1.2714 / AISI L6 dies necessary!

Customization in the manufacture of 1.2714 steel forging dies is equally important function that determines the efficiency and finesse. Unless the custom development of forging die is done, the attributes of 1.2714 steel could be of no use for the secondary manufacturer that seeks to achieve dimensional functionality and finesse also in its forged products. These forged products could be of diversity ranging from the machine components and tools to toys models and other products. Virat Steels offers to make custom forging dies in high quality DB6 steel and has been serving the diverse sectors of metals based forging.

Mode of Supply:
Virat Special Steels is the largest stockiest and supplier of DB6 / DIN 2714 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. DB6 die steel is available in flat, square and round shape.

To know about more specific details of DB6 steel ( DIN 1.2714 steel ),

Please visit the websites:

We Provide our Special Steels in All Major Cities India.

#Agra#Alwar,#Ambala#Anand#Bhiwadi#Dehradun#Ghaziabad , #Haridwar , #Nagpur#Ahmedabad#Pithampur , #Rudrapur #Waluj ,#Visakhapatnam#Coimbatore#Nashik#Mumbai#Ranchi#NewDelhi#Chandigarh#Bengaluru#Ernakulam#Howrah#Haryana#Rajkot#Jaipur#Surat#Thiruvananthapuram#Baroda#Kolkata#Indore#Gurgaon#Bhopal#Vadodara#PimpriChinchwad#Faridabad#Noida#Jamshedpur#Chennai#Secunderabad#NaviMumbai#Kanpur#Hyderabad#Pune#Thane#Manesar#Kundali , #Amaravathi#Ambattur#Bangalore#Belgaum#Chittoor#Dindigul#Mysore#Nellore#Kochi#Mangalore#Tirupur#Tuticorin#Madurai#AndhraPradesh#Karnataka#Puducherry#Kerala#TamilNadu#Telangana#Salem#Thanjavur#Trichy#Erode#Vellore#Ranipet#Sivakasi#Karur#Hosur#Nagercoil#Kanchipuram#Karaikudi#Neyveli#Cuddalore#Kumbakonam#Thiruvannamalai#Pollachi#Rajapalayam#Gudiyatham#Pudukottai#Vaniyambadi#Ambur#Nagapattinam#Trivandrum#Vijayawada#Guntur#Thirupathi#Nazarathpet#Kakinada#Kurnool#Kadapa#Nizamabad#Mahabubnagar#Karimnagar 

How do you choosing the right steel grade for forging ?

During forging, metal is pressed, pounded, or squeezed under great pressure into high strength elements called forgings.

Preheating the metal to the desired temperature before working it is often (but not always) a part of the method. Forging is a totally different process from casting (or foundry) since the metal used to make forged parts is never melted and poured (as in casting).

The forging process will produce parts that are stronger than those manufactured by the other shaping method. This is often why forgings are nearly always used wherever dependability and human safety are essential. However you will rarely see forgings as they are normally component parts contained within assembled things such as airplanes, cars, tractors, ships, oil drilling instrumentation, engines, missiles and all forms of capital equipment.

Steel is an iron-based alloy with small additions of carbon and other elements that impart improvements in various properties. Steel is among the most useful of metals. It is the metal that has the highest strength per unit cost. There are a wide range of steel compositions as well as a wide range of micro structures that can be produced. These ranges allow a large choice of properties to be achieved within the steel-alloy family.

Properties of Compound Steel:
It contains around 1% to 5% of steel that is consolidated with different components. Diverse combination components have remarkable properties and including these components enhance different qualities.

The normal properties of combination steel are Corrosion Resistance, Machinability, Hardenability and Weldability.

Best Steel for Forging:
In forging maximum used two steel grades i.e. H13 Tool Steel and DB6 Tool Steel. If you are research company that provide you steel for your forging company the you are at right place.

Virat Special Steels – India’s top Largest Supplier, Stockiest, Dealer, Trader Importer and Exporter of H13 Tool Steel and DB6 Tool Steel.

Learn More:
https://www.viratsteels.com/h13.html
https://www.viratsteels.com/db6.html
https://www.db6steel.com/

Any further queries feel free to contact us :
Email us: info@viratsteels.com or Call us now: +91-98140 21775

We Provide our Special Steels in All Cities in #India:

Delhi, #Kolkata, #Chennai, #Bangalore, #Hyderabad, #Ahmedabad, #Pune, #Surat, #Jaipur, #Kanpur, #Lucknow, #Nagpur, #Ghaziabad, #Indore, #Coimbatore, #Kochi, #Patna, #Kozhikode, #Bhopal, #Thrissur, #Vadodara, #Agra, #Visakhapatnam, #Malappuram, #Thiruvananthapuram, #Kannur, #Ludhiana, #Nashik, #Vijayawada, #Madurai, #Varanasi, #Meerut, #Faridabad, #Rajkot, #Jamshedpur, #Bhiwadi , #Rohtak , #Manesar , #Ahemednagar , #Alwar , #Anand , #Belgaum , #Dehradun , #Haridwar , #Mysore, #Noida , #Pithampur , #Rudrapur, #Waluj and many more..

Looking for the best quality Tool Steel, Die and Mold Steels Supplier for your engineering works!

As one of India’s leading special steel suppliers, #ViratSpecialSteels can supply the following industries requirement of steel practically off-the-shelf.

Virat Special Steels Pvt. Ltd., is one of India’s top Tool Steel, Die Steel suppliers, and Mold Steel Stuckists. This company provides special steel of every kind in sizes and shapes (flat, round, or bars) per customer requirements. Based in #Gurgaon (Haryana) & #Ludhiana (Punjab) India.

Virat Special Steels

Forging Industry – Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. Mainly material used: Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343(H11).

Pressure Die Casting – Die casting is performed by forcing molten metal under high pressure into a mold cavity & the cavity (mold cavity) is manufacture by using two hardened tool steel dies & perform similar to an injection mold. Mainly material used: Hot die steel i.e. DIN 1.2344(H13), DIN 1.2343(H11), and DIN 1.2581(H21).

Aluminum Extrusions – In Extrusion process material is pushed through a die to the desired cross section & in this manufacturing process it creates very complex cross section. The parts are being formed with an excellent surface finish. Mainly material used: – Hot die steels i.e. DIN 1.2344 (H13) grade.

Automotive Industry – Automotive industry are wide range of companies is mainly involved in manufacturing, design, development, of motor vehicles. Mainly material used: – Din 1.2714(DB6), DIN 40NiCrMo84(EN24), DIN 3343(M2), 16Mncr5, 20Mncr5.

Plastic industry – Polymer materials are manufactures in plastic industry and offers services to aerospace, building, construction, electronics, packaging and transportation. Mainly material used: – DIN 2738 (P20+ Ni), DIN 2311(P20).

Railways – They are involves mainly in manufacturing railways components i.e. Railway gear holder, Railway bogie cast parts, Railways axles, railways Sets of pins, Ground lever frame, adjustable crank, Compressor pistons, Compressor bearings. Mainly material used:-Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343 (H11), DIN 40NiCrMo84(EN24), 20NiCrMo5(EN353).

Oil & Gas – Oil & Gas they supply more than 60 percent of our nation’s energy. Natural gas also helps generate the electricity that powers our daily lives.

They also have a fully equipped quality assurance and process examination facility that conducts tests such as hardness and analyses of grain structure.

Find us:
Website: https://www.viratsteels.com/

Email us: info@viratsteels.com
Call Us Now: +91-9814021775

Watch Now:
https://www.youtube.com/watch?v=c4h5KqyzVd0

Virat Special Steels Pvt. Ltd.
AN ISO 9001:2015 CERTIFIED TRADING COMPANY

We are committed with the continuously improvement and up gradation of our infrastructure to world class standards.

VIRAT SPECIAL STEELS PVT. LTD. is one of the largest Importer, Exporter and Stockist of Die Blocks (DIN 1.2714, DB6, H13, H11), Tool Steels, Die Steels, Special Steels and Alloy Steels in various grades.

Virat Special Steels – AN ISO 9001:2015 CERTIFIED TRADING COMPANY

Our material stocking capacity in our 3 yards shed at different regions together is more than 3500 tons and having complete and updated infrastructure with facility of horizontal & vertical band saw cutting machines running at our different ware houses in different regions to serve the ever increasing delivery requirement of our esteemed clients.

We have our own machining shop which can help our customers with some value addition and also save their downtime with regards to raw material. Having the dedicated team strength of 50 people we can also claim to have one of the fastest responding people to the queries of our end users.

Ludhiana-Stocks
Ludhiana-Stocks

MACHINERY & EQUIPMENTS:

  • 27 Bimetal Horizontal & Vertical Bandsaw Machines (Cutting capacity upto 2500mm x 1100mm)
  • 14 Overhead lifting Cranes – Lifting capacity upto 20 Tons
  • Lifting Magnets = 20 Nos. – Lifting capacity upto 5 Tons
  • 2 Fork Lifter – Lifting capacity upto 3 Tons
  • Chemical & Spectro Lab
  • UT Testing Machine
  • Machining Plant
  • Hardness Tester

For more information visit
https://www.viratsteels.com/

Feel free to contact us :
Corporate Office, #Gurgaon
Administrative Office, #Ludhiana
Email: info@viratsteels.com.
or Call us: 098140 21775

Why high demand for DB6 steels?

DB6 steel offers desirable characteristics for hot metal forging dies manufacture

DB6 Steel, DIN 2714, AISI L6, ATK4

Because the DB6 steel offers desirable characteristics for hot metal forging dies manufacture…

Think of different interventions in the developmental history of mankind and economy and you will stumble upon a few that really changed the pace and direction of growth. Steel is one such product and it is rather a much younger sibling of the parent metal iron; while Iron Age cultures synergized the human development in different parts of world. Steel gave the impetus and desirable perfection quotient to generate viability for many innovations. No wonder, we developed a passion for this alloy of iron and are still engaged in making its specialized types like the DB6 steel.

DB6 which is also known as DIN 2714 in Europe, SKT4 in Japan and AISI L6 in USA is considered the perfect choice for the manufacture of closed forging dies. These dies are then used in various enterprising tasks in multiple verticals of economy.

DB6 has found high acceptance in the expanding economies like India and also in Europe (nomenclature as DIN2714). VIRAT SPECIAL STEELS PVT. LTD is the largest stockiest of DB6 / 2714 steel grades in world level with multiple size range. Here, the metal-based dies are in high demand by the enterprises that are making whole range of metal products and components of direct and indirect use.

Specialized companies offer to deliver customized DB6 dies readymade in demanded dimensions.

#db6steel , #din2714 , #forging , #viratspecialsteels , #trading,  #ludhiana, #gurgaon,  #pune#india 

Learn more:

https://www.viratsteels.com/db6.html