AISI P20+ni
now browsing by tag
Are you looking for high quality Plastic Mold Steel material in India?
Look no further than VIRAT SPECIAL STEELS PVT. LIMITED , INDIA. We are one of the leading suppliers and stockists of P20+Ni Steel / DIN 2738/ and P20/ DIN 2311 Steel in India and abroad.
DIN 2738 is a premium mold steel that offers excellent polishability, wear resistance, and toughness, making it ideal for a wide range of tooling applications. DIN 2738 or P20+Ni is a specially designed mold steel with improved toughness and excellent machinability compared to standard P20 grades.
Chemical Composition:
Carbon (C): 0.35-0.45%, Manganese (Mn): 1.30-1.60%, Silicon (Si): 0.20-0.40%, Phosphorus (P): ≤ 0.030%, Sulfur (S): ≤ 0.030%, Chromium (Cr): 1.80-2.10%, Nickel (Ni): 0.90-1.20%, Molybdenum (Mo): 0.15-0.25%
Application:
DIN 2738 / DIN 2311 is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.
At Virat Special Steels, we provide DIN 2738 / DIN 2311 in round bar and flat bar blocks in different sizes and conditions to meet your specific requirements. Our team of experts is ready to assist you with any queries you have about DIN 2738 steel.
Learn more: https://www.viratsteels.com/din-2738.html
Contact us today to buy the best quality DIN 2738 steel for your tooling needs!
🌐https://www.viratsteels.com 📬 info@viratsteels.com ☎+91 98140-21775
Are you looking for the premium quality Plastic Mold Steel in India ?
Discover the unparalleled quality and reliability of DIN 1.2738 steel with Virat Special Steels, the largest stockiest and supplier of this exceptional material in flat, square, and round bar forms.
DIN 1.2738 is specially used for Plastic injection die moulds.
The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. DIN 2738 is upgraded version of plastic mold steel of 2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB with having uniform hardness. The additional nickel content of 1 % increases through hardening. It has good machinability, suitable for Texturing, fine polishability, adequate corrosion resistance, vacuum-degassed steel.
Applications where you can use, DIN 2738 is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods, High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Up setter Blocker, forging dies, Different dies & mold for plastic products etc.
Our commitment to providing top-notch steel in all sizes tailored to your requirements sets us apart. In this comprehensive guide, we delve into the features, applications, and benefits of DIN 1.2738 die steel, available in flat, square, and round shapes.
Trust Virat Special Steels as your partner in achieving precision and strength with DIN 1.2738 steel. Our expert team is ready to assist you with any queries related to DIN 1.2738 steel – your gateway to precision engineering. Virat Special Steels‘ commitment to quality. Certifications and standards met by DIN 1.2738 steel.
For more information visit
https://www.viratsteels.com/plastic-mould-steel.html
Any further queries feel free to contact us :
Email: info@viratsteels.com or Call: +91 98140 21775
Are you looking for PLASTIC MOULD STEEL in India?
Plastic mould steels are widely used for manufacturing mould for plastic.
Get in touch with us today to place your requirement!
DIN 2738 #PlasticMouldSteel, The equivalent grade P20+Ni | DIN 2738 | AISI P20+Ni …
DIN 2738 which is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.
Although less expensive options such as Aluminum exist for making moulds to be used for shaping plastic, steel is most often the optimum one. It may be impose more investment to begin with but this is offset by its undoubtedly greater operational life and better finish.
Also the specialized steels that have been created for plastic moulding make for rapid process speed – for any duration it can handle more repetitions than other materials and so enhance productivity. DIN 1.2738 Steels are low Carbon consisting of Carbon between 0.35 to 0.45%
Mode of Supply:
Virat Special Steels is the largest stockiest and supplier of DIN 2738 steel in flat, square and round bar. We provide steel in all sizes as your requirements.
Learn more:
https://www.viratsteels.com/p20ni.html
For more information Contact us:
info@viratsteels.com, +91-9814021775